SE Sport 200 Hydrofoil, fits 8 hp - 40 hp engines

I installed this on a 15HP Suzuki mounted on a ten foot RIB. With myself and my wife, it allows us to plane at a significantly lower throttle than previously, so I’m very happy about that. With the two of us at lower speeds I’m not sure there’s much benefit. I haven’t tried it with more weight aboard. I’m not sure that, with just myself and not planing that it has much effect on gas usage. But, very pleased with the planing ability at such a low throttle.

Was a little stressful drilling into new motor and making sure everything lined up correct. But after install put boat in water and it works great...my boat is a 15ft polarcraft with 30 hp merc tiller and was almost unusable prior to putting on the se sports 200. The bow would just be way too high. Now boat gets on plane and no bouncey bow. Only lost 2mph. I would trade the 2mph for a usable boat any day. And what a bonus can make 20+ mph sharp turns and feel completely comfortable

Was a little weary about drilling holes in my brand new 20hp Tohatsu but glad I did. Came with easy to follow instructions and the installation was quick. This hydrofoil worked as advertised. Was encountering major porpoising on my Skiffworx Wrightwater 12, from 3/4 to full throttle. After installation I performed a test run the proposing was completely eliminated. Extremely happy.

Gheenoe LoTide with 20 Tohatsu EFI. Improved several aspects of handling. Boat jumps up on plane starting from 18" of water depth. Stays on or near plane when slowing down to about 12 mph. Prop has less tendancy to blow out with tight turns and weeds. Acceleration improved but top end dropped from 26 to 24 mph on the GPS. I believe it would perform better with minor height and trim adjustments which I can't make, a jackplate and power trim would be great for dialing it in. Changed the spray pattern off the back of the boat, overall increased spray which indicates some drag. Finally, can't use my test tank on land anymore because the big fin won't fit in.Regarding installation, it was difficult to drill the front holes in the cavitation plate due to clearance problems with my drill. Also one of the nuts seized on the bolt before it was fully tight. Not bad for one size fits all but I would have paid more for one designed specifically for my lower unit.Overall a plus and I will keep it on.

This product has added to my boat dramatically. If I turned a little too sharp the boat would lose power from cavitation. With this product installed I feel total control and I don’t have to worry the motor will suck air. The design creates almost a jet flow through the patented waterways creating almost a jet like propulsion. Highly recommended and from this company specifically. Super high-quality.

I installed this with terror, because I was drilling into the plate of the lower leg of my new outboard motor, but when I went out to test it with the idea that if it made any difference at all I would be OK. Well the difference was just amazing. It works nothing short of Awesome. The inflatable jumps onto plane now without wallowing around with the bow in the air for a few seconds. I strongly recommend this product. It appears to be still, well molded and looks good on the motor without being outlandishly large. I bought the SE Sport 200 for my 15 horse 4 stroke Tohatsu.

Added a 10° wedge to my dinghy for extra tuck in and stern lift ... With this I probably would not have to, I was already able to run the outboard up a few degrees... Install was easy enough with basic tools. It made the difference between my back hurting from leaning forward on my dinghy to being able to sit all the way in the back and relax. Plane is much quicker and starts at Lower speeds, boat is more stable, speed and fuel efficiency increases.Boat' Whaly model 310Outboard: Honda bf 9.9 4 stroke

This hydrofoil solved all the problems I was having with my boat and motor. I have a 15’ Jon boat with 10hp motor and weigh 270 and just by adding this increased my speed with me leaning back in seat, before it I used to have to move my weight forward to get bow down and higher speed. Also handles very well in turns and makes them easier. Also can finally trim motor good with this on. I will have one on all my boat motors from now on...