- Handheld unit combines a two-channel digital oscillo for viewing electrical signals with a digital multimeter for measuring voltage and resistance.
- Real-time sample rate is 625Ms/s for 60MHz models, 1.25GS/s for 100MHz models, 2.5GS/s for 200MHz models, and 5GS/s for 500MHz models, and record length is 10,000 points per channel for acquiring detailed waveforms.
- Zoom function, three math functions plus FFT, and automatic and cursor measurements for analyzing waveforms.
- 6" color LCD shows up to four readings or waveforms simultaneously.
- Meets EN and IEC 61010-1:2001 and 61010-031:2002+A1:2008, ANSI/ISA 61010-1 (82.02.01), and CAN/CSA C22.2 61010-1-04 safety standards, and is rated CAT III installations to 1,000V and CAT IV installations to 600V.
Size:60 megahertz, 5.8ns Rise time with Kit
The Fluke Meter 190 series is a handheld electrical test
device that combines a two-channel digital oscillo for
viewing electrical signals with a manual- and auto-ranging
digital multimeter for measuring AC and DC voltage to 1,000V,
AC/DC voltage to 1,000V true RMS, and resistance to 30MΩ. The
unit can also measure power for single- and three-phase systems,
displaying the total power (watts), apparent power (VA), reactive
power (VAR), and the power factor (PF) to determine how
efficiently an installation uses power. The oscillo has a
real-time sample rate of 625Ms/s for 60MHz models, 1.25GS/s for
100MHz models, 2.5GS/s for 200MHz models, and 5GS/s for 500MHz
models, and a record length of 10,000 points per channel for
acquiring detailed waveforms. A zoom function magnifies waveforms
up to x100, three math functions—add, subtract, and multiply—plus
FFT (fast fourier transform), and automatic and cursor
measurements allow an in-depth analysis of waveforms. Edge, pulse
width, video, and N-cycle (burst) triggers allow isolation of
specific signals. The oscillo's advanced automatic
triggering recognizes signal patterns and automatically optimizes
triggering, timebase and amplitude settings. To aid debugging,
the pass/fail testing compares a live waveform to a reference
waveform and can be set to store either waveforms that match
(pass) or do not match (fail) the reference waveform. The
5,000-count multimeter has two ranging modes: manual, which
allows the user to select the operating range, and auto, which
automatically selects the appropriate operating range. The
relative function allows a measurement to be set as a reference
value and displays subsequent measurements as a positive or
negative deviation from that value, and the data-hold function
freezes a reading on the display to aid documentation. A
continuity buzzer confirms that the circuit conducts electricity,
and a diode check detects whether a circuit’s diodes are working
properly. The unit automatically stores the 100 most recent
screens in its internal memory which can be accessed by the
replay function. Additionally, the oscillo has a recorder
that captures from 6 seconds to 48 hours of waveforms and stores
up to 30,000 data points per channel. Its TrendPlot chart
function graphs the minimum, maximum, and average readings over
time from 60 minutes at 5 seconds per division to 22 days at 30
minutes per division. Additional specifications ( https://images-na.ssl-images-.com/images/G/01/BISS/OscillosMix/FlukeMeter190series.usermanual.pdf#page=118 ) include a rise time of 5.8ns for the 60MHz models, 3.5ns for
the 100MHz models, 1.7ns for the 200MHz models, and 0.7ns for
500MHz models, and various triggering features. The unit has a 6"
(53 mm) color LCD with a resolution of 320 x 240 pixels for
viewing waveforms and measurements, and an LED backlight for
visibility in low light. It can display up to four readings or
waveforms simultaneously. A multimeter is an electrical testing
tool for measuring multiple properties of an electrical circuit
to verify proper operation or diagnose problems.
The oscillo has a USB host port for storing data on a
2GB-maximum flash drive and a USB device port for connecting to a
compatible PC for storing and analyzing data with the included
demonstration version of FlukeView software (a full version is
included for models with kit). The software is compatible with
Microsoft Windows 2000 and beyond operating systems. The unit
operates on a rechargeable lithium ion battery pack or a 120VAC,
50/60Hz adapter/charger (both included). When operating on
battery power, it automatically shuts down after 30 minutes of
non-use to conserve battery life and has a low-battery indicator
that signals when the battery needs recharging. It meets European
Standard (EN) and International Electrotechnical Commission (IEC)
61010-1:2001 and 61010-031:2002+A1:2008, American National
Standards Institute and International Society of Automation
(ANSI/ISA) 61010-1 (82.02.01), and CAN/CSA (Canadian Standards
Association) C22.2 61010-1-04 safety standards, and is rated for
CAT (category) III installations to 1,000V, which covers
equipment in fixed installations, such as switches in the fixed
installation and some industrial equipment that is permanently
connected to the fixed installation, and CAT IV installations to
600V, which covers equipment at the origin of the installation,
such as electricity meters and primary over-current protection
equipment. It has European Conformity (CE) marking and is Ingress
Protection certified IP51. It comes with two voltage probe sets,
a set of test leads, FlukeView software, a USB interface cable, a
rechargeable lithium ion battery pack, an AC adapter/battery
charger, and a user manual. The Fluke Meter 190 series is
available with and without the SCC290 kit. The kit includes an
activation key that unlocks the full-version of FlukeView
software for storing and analyzing data, and a hard carrying case
for storing the unit and its accessories.
Specifications
--------------
Display
6" (153 mm) color LCD with LED backlight
Bandwidths available
60MHz, 100MHz, 200MHz, 500MHz
Input channels
Two
Real-time sample rate
625Ms/s for 60MHz models, 1.25GS/s for 100MHz models, 2.5GS/s for
200MHz models, 5GS/s for 500MHz models
Record length
10,000 points per channel; 30,000 points per channel in record
mode
Maximum AC and DC voltage measured (with probe)
1,000V
Maximum resistance measured
30MΩ
Installation rating
CAT III, 1,000V; CAT IV, 600V
Standards met
EN and IEC 61010-1:2001 and 61010-031:2002+A1:2008, ANSI/ISA
61010-1 (82.02.01), and CAN/CSA C22.2 61010-1-04 safety
standards; CE marking; IP51
Power source
Rechargeable lithium ion battery pack; adapter/charger for
120VAC, 50/60Hz
Dimensions (H x W x D)
265 x 190 x 70 mm (10.5 x 7.5 x 2.8 inches)
Weight
2.1 kg/4.6 lb.
H is height, the vertical distance from the lowest to highest
point; W is width, the horizontal distance from left to right; D
is depth, the horizontal distance from front to back.
Oscillos are electrical testing devices used to verify the
functionality of equipment that generates an electrical signal.
Oscillos measure the voltage of an electrical signal over
time, and display the measurement as a waveform in a visual
graph. The waveform shows the sweeps (or refresh) of voltage on a
vertical (Y) axis, and the time on a horizontal (X) axis. Details
of a waveform demonstrate the signal over time. Most
oscillos have two or four channels for inputting a signal.
Some digital oscillos offer more than four channels,
allowing channels to be dedicated to specific signals and
applications. Bandwidth is the maximum frequency of a signal that
an oscillo can capture. A constant image will display if a
signal is shown at a high frequency. Oscillos may be analog,
digital, or mixed signal. An analog oscillo directly
displays an input signal as a continuous waveform, typically in a
luminous phosphor on a cathode ray tube (CRT). A digital
oscillo converts the input signal into a digital format and
reassembles the waveform for display, typically on an LCD. A
mixed signal oscillo (MSO) displays both analog and digital
formats. Some oscillos can display more than one channel and
type of measurement simultaneously. Some oscillos can
capture waveform signals to memory, and recall them. They may
provide real-time intensity grading, and may have the ability to
adjust frequency of display. Oscillos can be powered with
batteries or electricity, or may have a built-in generator. They
are commonly used for testing, measuring, and inspecting in
science, engineering, telecommunications, automotive, and
electronics applications.
Fluke Corporation manufactures electrical testing tools and
software for industrial and commercial applications. The company,
founded in 1948, is headquartered in Everett, WA.
What's in the Box?
------------------
* Fluke Meter 190 series handheld oscillo/multimeter
* (2) voltage probe sets
* Set of test leads
* FlukeView software (demonstration version for models without
kit, full version for models with kit)
* USB interface cable
* Rechargeable lithium ion battery pack
* AC adapter/battery charger
* User manual
* Hard carrying case (for models with kit)