Sunnydaze Solid Teak Outdoor Slatted Armchair - Light Brown Wood Stain Finish

Excellent chair great lumbar support, looks super, is sturdy, there was one small defect (missing bolt insert in brace) which the seller quickly rectified.

I really like these chairs. Agree with the other reviewers about putting a finish on them though, they are bare wood when they arrive. I highly recommend hiving them a couple coats of teak oil! They turned out great. Hoping to use them for years to come!

The media could not be loaded. I purchased two of these chairs. They can be used inside or out.One of them is very well-made & the second leaves a little to be desired, but not worth sending back. There are a few cracks in the wood of the 2nd.Both chairs have the same problem with screws. The screws did not easily set into the nuts which are embedded in the wood.I worked around this problem by using a longer bolt than the screw to correct the inside of the nut embedded in the wood in one case.In the other case, I had to use fast setting epoxy with a long, thin spout to fill the nut and the pathway for the bolt.In any case, expect about an hour of assembly time if you're reasonably handy. The instruction drawing left a little to be desired.Cushions seem to be a necessity so I bought a set and overall appearance is very good. The value for the money remains to be seen over time.

It arrived with some missing screws. I wrote the seller and he mailed me the screwed immediately. The chairs are beautiful

Upon opening the box the chair appears to be very nicely made and very sturdy. When following the instructions and trying to assemble it I am only able to get 2 bolts to go in all the way and tighten. Two of the bolts on the seat will not go in at all because they are so miss aligned and the rest of the bolts bottom out before they are all the way in. And to top it off one of the front legs is crooked. I am still going to order a replacement, hopefully this was just a bad example, Hopefully.

Loved it. Great quality. Ordered it for my mom who needed a steady chair for when trying to get up.

I ordered 2 of these. On the first chair one of the holes where the threaded piece is Pre installed was not drilled deep enough. This results in the screw stopping before pieces are held together tight. I had to drill the hole behind the threads about 1/4 deeper. On chair 2 I found the opposite problem. 2 of the threaded pieces were Pre installed too deep and the 40 mm (I) screws could not “catch” the threads. I had to countersink the hole about 1/8 inch deeper.They chairs do feel sturdy (now) and are comfortable without cushions.

These chairs are quality with a great price and very comfortable. We may add a seat cushion eventually but don’t feel like it’s necessary for comfort. They look great with our refurbished teak table. I almost gave up looking and then my husband found these on Amazon. We hope to enjoy them for years!