MOOG K90255 Front Upper Suspension Ball Joint for Toyota Tundra

My lower ball joints on my 1999 Tacoma were finally showing some age, so I decided to replace them and the uppers before I had a catastrophic failure. These Moog UBJ's are a quality product, but they can be a beast to install if you don't have the proper equipment (a press). There are ways to get these things seated without a heavy duty press, but I wouldn't recommend them if you value your sanity. The stock uppers on my Tacoma were smooth, while these are grooved to ensure a good, solid seat. The grooves require a considerable amount of force to be applied in order to get these things in, something I didn't have the tools or the time for. I ended up taking the old uppers out and just bringing the arms into a shop where I had them press the new uppers in for a small fee.BOTTOM LINEThis is a solid product that seems every bit as good or better than the OEM joints. It's well worth the money, but the install can be slightly challenging without the right equipment.

They made such an amazing product! Solid install, so far so good! 97 4runner is feeling the love

Great product, exact fit, just be careful putting the dust boot on. I had to press it on and when I took the press off the first time I ripped the boot; couldn't figure out any other way to get it on. I haven't found the boot for sale just by itself so I am now the proud owner of a second UBJ just so I could get the boot (can you do something about that Moog?). Also on the boot it is marked for which side goes on the inside, so keep an eye out for that. Pressing the UBJ in is a huge pain in the butt, so be ready for that. One of the UBJs I ordered was missing the zerk fitting, but I ordered it from the warehouse deals side so I can't blame it on Moog, I guess Amazon didn't notice the missing piece when it was returned. Also the zerk fitting is a weird size, went through two different packs of zerks and none of them fit on there. Had the UBJ on for about a month now, did some light offroading, very pleased.

Installed these on my 1996 Toyota Tacoma 3.4L V6 4x4. This seems to be a good quality part and has worked well thus far (~ 2 months) on my truck. Be sure to clean out the bore and the upper and lower surfaces of the steering knuckle or else the install will be difficult. Also install of the rubber boot is an interference fit and is a bit tricky. It was easy once I found the right size cylinder to put around the base and tap on with a rubber mallet. Without having a steel cylinder (which I had from a front end suspension service tool kit) I think getting the rubber boot on would have been much more challenging. It was easy with using the cylinder as an install tool.

These are heavy duty ball joints, everything g about them is beefier than when compared to the stock ubj I removed fr the tundra with a ton of play, after replacing the clicky passenger side, it bought to my attention my driver side ubj needed replacing aswell. So now I ha e 2 of these guys, great silent improvement.Tip for putting the boot on, just use the same cup that you use to remove the ubj, it should be the same diameter and makes installing the boot fun!

The ball joint boot is too small for the ball joint.Maybe the boot included in the box is the wrong size or the boot itself is not made correctly to fit the boot. I spent an hour trying to get it on and it wouldnt fit. The rim of the boot is made of metal and there is no play or stretch to it to fit around the ball joint

Moog Ball joint is well built, boot is pain to get on but overall product is high quality. Replacement job can be done at home but is rated as difficult and does require specialty tools that can be rented from your local auto parts store.

Unfortunately did not come with instructions for installing the boots, they needs to be either pressed on or installed with pliers and pulled down

Muy bien

Great product

Worked great, superior quality and greasable. Great price!

Haven't put a lot of kms on them yet but they appeared to be good quality. They are also greasable so that's good. $35 from amazon.ca, you can't find a better value.

The balljoint itself is okay, just the boot that comes with it ripped just after a month of using. It is not the right one and I’m very disappointed.